1 Channel Oscilloscope

The best choice to replace an analogue oscilloscope.

+ The simple control panel is similar to an analogue oscilloscope
+ Bandwidth : 10MHz(AS101); 20MHz (AS201)
+ Sample rate : 100MS/s
+ 1-Channel
+ 130,000 wfms/s waveform capture rate, easily capturing exceptional and low probability events
+ 3.7″ Colored LCD
+ Compact case


Model AS101 AS201
Bandwidth DC:0~10MHz,

AC: 10 Hz~10MHz


AC: 10 Hz~20MHz

Channel 1
 Horizontal system Sample Rate 100MS/s
Interpolation (Sinx)/x
Scanning speed (S/DIV) 0.05us/DIV ~ 0.1s/DIV,step by 1 – 2 – 5
relay time accuracy ±100 ppm
Trimming Ratio ≧2.5:1
Vertical system Sensitivity 5 mV/DIV~10 V/DIV
Displacement ±10DIV
Low Frequency ≥10 Hz (at input, AC coupling, -3 dB)
Rise time (at input, Typical) ≤ 30 ns
Trimming Ratio ≧2.5:1
Input coupling

DC,  AC ,  Ground

Input impedance 1 MΩ±2%, in parallel with 20 pF±5 pF
Max. input voltage 400V (DC+AC, PK – PK)
X-Y Model
Sensitivity X:0.5V/DIV   Y:0.1V/DIV ~ 1V/DIV
Bandwidth(-3dB) DC: 0 ~ 1MHz  AC: 10Hz ~ 1MHz
Trigger level range ±4 DIV from the screen center
Trigger level Accuracy (typical) ±0.3 DIV
Trigger Sources Int, Line, Ext
Trigger Mode Norm, AUTO, TV
Edge trigger Rising, Falling
Video Trigger Support standard NTSC, PAL and SECAM broadcast systems
 Sample Rate / Relay Time ±100ppm
Trigger lock support
Ext. Trigger Input Impedance 1 MΩ±2%, in parallel with 20 pF±5 pF
Ext. Trigger Max. Input Voltage 400Vpp
Trigger Output of the probe compensator
 Output Voltage (Typical) Square, 0.5Vpp±2%
Frequency (Typical) Square wave of  1 kHz(±1%)
Display 3.7″ Colored LCD (Liquid Crystal Display)
 Power Supply 100V – 240V AC, 50/60Hz, CAT II
 Power Consumption <15W
 Fuse 1A, T class, 250V
 Dimension (W x H x D) 117 x 192 x 288 mm
 Device Weight About 1.8 kg